DESCRIPTION

ONE STEP™ has been developed as a simple-to-use restoration system for marble, terrazzo, and polished limestone floors. ONE STEP™ CRYSTALLIZER SPRAY N’ BUFF produces a very high polish. The newly restored surface will resist scuffs and scratches. This restored surface will be very durable. ONE STEP™ CRYSTALLIZER SPRAY N’ BUFF dries as you buff and therefore requires no messy clean-up.

Authorized UL Product

KEY MARKET INFORMATION

Code: 2501

Packaging: 

·         1 Gal

·         32 oz Qt

DIRECTIONS

SURFACE PREPARATION: Surface must be clean and dry. On floor surfaces, make sure all waxes, floor finish, or other coatings are removed. If there is a coating on the floor, use NCL HURRICANE™ Intensive Stone Cleaner for removal. Rinse surface thoroughly with water and air dry prior to crystallization.

PLEASE NOTE: Worn out or damaged surfaces may require resurfacing prior to crystallization. Make sure to cover any sensitive surfaces such as metals, glass, carpet, etc. that may be exposed to over-spray.

APPLICATION: Use a 175 RPM Floor machine designed for crystallization (130 – 180 lb.), equipped with a #0 or #1 grade steel wool pad. Apply ONE STEP™ Crystallizer Spray N’ Buff (with a spray bottle and trigger) at a rate of 2 to 3 squirts per square yard (.836 sq. meter) and immediately buff until surface is completely dry. Buff in both directions until desired gloss is achieved. ONE STEP™ Crystallizer Spray N’ Buff yields approximately 2000-5000 square feet (185 – 465 sq. meters) per gallon of coverage.

For daily maintenance after re-polishing, use the SCS Daily Maintenance System (PATINA™-HURRICANE™); see the STONE CARE SOLUTIONS™ brochure for more information.

NOTE: Shake lightly before use.

CAUTION: Since marble and limestone are a product of nature and their components can vary, they may react differently to this product. For this reason, always test in a small, inconspicuous area for adverse reactions.

FEATURES & BENEFITS

·         Dries as you buff— requires no messy clean-up.

·         Newly restored surface will resist scuffs and scratches.

·         Classified by Underwriters Laboratories for Slip Resistance.

SPECIFICATIONS

Product type: Vitrification Compound

Appearance: Opaque liquid

Odor: Mild, Bland

Specific Gravity (g/cc): 1.08 ± 0.01

pH (concentrate): 2.3 ± 0.2

Flash Point: None

Safe on Stone: Yes

Scuff Resistance: Excellent

Scratch Resistance: Excellent

Increased Gloss: Outstanding

UL Classified

SAFETY

DANGER: HARMFUL IF SWALLOWED. CAUSES SERIOUS EYE DAMAGE. CAUSES SKIN IRRITATION. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF REACH OF CHILDREN.

Prevention: Do not breathe dust or mist. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Use only outdoors or in a well-ventilated area.

Response: If swallowed, rinse mouth. Do NOT induce vomiting. If on skin (or hair), immediately take off all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled, take person into fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
This product is a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.

Additional Safety Measures: Read the entire label and SDS before using this product, and for additional first aid measures.