NCL
QWIK-SCRUB
-Scrub & Recoat Cleaner-
![](https://www.kongdepot.com/wp-content/uploads/2022/12/Qwik-Scrub-Gallon.png)
DESCRIPTION
QWIK-SCRUB™ is a heavy-duty, water-based cleaning concentrate designed for scrub / re-coat maintenance procedures. It is ideal for use in automatic scrubbers equipped with a proper floor pad or brush. Using a mild pH range formulation, QWIK-SCRUB™ aggressively removes embedded soils and scuffs in upper layers of finish film, and prepares the surface for re-coating with a minimum of rinsing, saving time and labor.
KEY MARKET INFORMATION
EDUCATION
In between the common floor stripping times of winter breaks and summer vacations, use QWIK-SCRUB™ to periodically deep scrub and prepare the surface for a re-coating.
HEALTHCARE
QWIK-SCRUB™ delays the stripping cycle, cutting down on floor stripping events which inconveniences staff and patients in 24-hour facilities.
RETAIL
Floor stripping requires areas of a merchandise floor to be closed off to customer traffic during open hours, and requires staff to be present if done during off hours. QWIK-SCRUB™ delays those costly stripping events and allows floor techs to apply a fresh coating to keep floors looking great.
INDUSTRIAL
When production cycles prohibit a facility from frequent shut-downs for floor stripping, performing a deep scrub and recoat is a quick and efficient alternative.
GOVERNMENT
Prepare surfaces throughout the facility to accept a recoating of finish. Delays the stripping cycle, cutting down on the floor stripping events to maximize manpower production and revenue.
BUILDING SERVICE CONTRACTORS
Building Service Contractors know that the ability to delay the stripping portion of the floor care life cycle while also being able to maintain the impressive appearance of the floors in a facility through deep scrubbing and recoating, results in satisfied clients.
Code: 0955
Packaging:
· 5 Gal Pail
· 1 Gal
DIRECTIONS
DILUTE
PRODUCT AS FOLLOWS:
Moderate soil /build-up, Light finish removal: Dilute 5 oz. (1:25) of
QWIK-SCRUB™ per gallon of warm water
Heavy soil /build-up, Heavy finish removal: Dilute 10 oz. (1:12) of QWIK-SCRUB™
per gallon of warm water
SCRUB/RE-COAT
USING STANDARD 175 RPM FLOOR MACHINE: Dilute QWIK-SCRUB™ in mop bucket according to above
dilution directions. Liberally mop solution onto floor surface and allow to
dwell for 1 to 4 minutes (depending on how deeply it is desired to scrub). With
machine and scrub floor pad or brush, scrub surface of floor until all embedded
soils and scuffs are removed from finish. After scrubbing, remove solution from
floor with wet-dry vacuum or a clean mop. Damp mop rinse with clear water to
remove any excess residue. Allow floor to completely dry prior to re-coating.
SCRUB/RE-COAT
USING AUTOMATIC SCRUBBER:
Dilute QWIK-SCRUB™ in mop bucket according to above dilution directions.
Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes
(depending on how deeply it is desired to scrub). Fill auto scrubber with clear
water, and mount scrubbing pad or medium grade brush. With vacuum off and
squeegee up, scrub the floor until all embedded soils and scuffs are removed
from finish. Lower squeegee and vacuum all scrubbing solution. Using clear
water from the auto scrubber, rinse floor to remove any excess residue. Allow
floor to completely dry prior to re-coating.
FEATURES
& BENEFITS
·
Mild
range pH formulation aggressively removes embedded soils and scuffs
·
Reduced
rinsing saves time and labor
·
Use
with standard floor machine or with automatic scrubber
SPECIFICATIONS
Color: Pink
Odor: Orange
pH
(Concentrate): 9.9
Upper
Cloud: >140°F
Lower
Cloud: < 25°F
Flash
Point: Not available
Biodegradable: Yes
Specific
Gravity (g/cc): 1.01
± 0.01
Density
(lbs/gal): 8.4 ± 0.1
Free
Rinsing: Yes
Non-Corrosive: Yes
Shelf
Life: 1 year minimum
in original unopened container
SAFETY
WARNING: MAY CAUSE AN ALLERGIC SKIN REACTION. CAUSES
SERIOUS EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN
Prevention: Avoid breathing mist or vapor. Wash thoroughly after
handling. Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves. Wear eye/face protection.
Response: If on skin, wash with plenty of water. If in eyes, rinse
cautiously with water for several minutes. Remove contact lenses if present and
easy to do. Continue rinsing. If skin irritation or rash occurs, get medical
advice/attention. If eye irritation persists, get medical advice/attention.
Wash contaminated clothing before reuse.
Storage: Store away from incompatible materials.
Disposal: Dispose of contents/container in accordance with
local/regional/national/international regulations.
This product is a “Hazardous Chemical” as defined by the OSHA Hazard
Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA
TSCA Inventory List.
Additional Safety Measures: Read the entire label and SDS before using
this product, and for additional first aid measures.