NCL ONE
STEP
-Crystallizer-
DESCRIPTION
ONE STEP™ has been developed as a simple-to-use restoration system for marble, terrazzo, and polished limestone floors. ONE STEP™ CRYSTALLIZER SPRAY N’ BUFF produces a very high polish. The newly restored surface will resist scuffs and scratches. This restored surface will be very durable. ONE STEP™ CRYSTALLIZER SPRAY N’ BUFF dries as you buff and therefore requires no messy clean-up.
Authorized UL Product
KEY MARKET INFORMATION
Code: 2501
Packaging:
· 1 Gal
· 32 oz Qt
DIRECTIONS
SURFACE PREPARATION: Surface must be clean and dry. On floor surfaces, make sure all waxes, floor finish, or other coatings are removed. If there is a coating on the floor, use NCL HURRICANE™ Intensive Stone Cleaner for removal. Rinse surface thoroughly with water and air dry prior to crystallization.
PLEASE NOTE: Worn out or damaged surfaces may require resurfacing prior to crystallization. Make sure to cover any sensitive surfaces such as metals, glass, carpet, etc. that may be exposed to over-spray.
APPLICATION: Use a 175 RPM Floor machine designed for crystallization (130 – 180 lb.), equipped with a #0 or #1 grade steel wool pad. Apply ONE STEP™ Crystallizer Spray N’ Buff (with a spray bottle and trigger) at a rate of 2 to 3 squirts per square yard (.836 sq. meter) and immediately buff until surface is completely dry. Buff in both directions until desired gloss is achieved. ONE STEP™ Crystallizer Spray N’ Buff yields approximately 2000-5000 square feet (185 – 465 sq. meters) per gallon of coverage.
For daily maintenance after re-polishing, use the SCS Daily Maintenance System (PATINA™-HURRICANE™); see the STONE CARE SOLUTIONS™ brochure for more information.
NOTE: Shake lightly before use.
CAUTION: Since marble and limestone are a product of nature and their components can vary, they may react differently to this product. For this reason, always test in a small, inconspicuous area for adverse reactions.
FEATURES & BENEFITS
· Dries as you buff— requires no messy clean-up.
· Newly restored surface will resist scuffs and scratches.
· Classified by Underwriters Laboratories for Slip Resistance.
SPECIFICATIONS
Product type: Vitrification Compound
Appearance: Opaque liquid
Odor: Mild, Bland
Specific Gravity (g/cc): 1.08 ± 0.01
pH (concentrate): 2.3 ± 0.2
Flash Point: None
Safe on Stone: Yes
Scuff Resistance: Excellent
Scratch Resistance: Excellent
Increased Gloss: Outstanding
UL Classified
SAFETY
DANGER: HARMFUL IF SWALLOWED. CAUSES SERIOUS EYE DAMAGE. CAUSES
SKIN IRRITATION. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF REACH OF
CHILDREN.
Prevention: Do not breathe dust or mist. Wash thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection. Use
only outdoors or in a well-ventilated area.
Response: If swallowed, rinse mouth. Do NOT induce vomiting. If on skin
(or hair), immediately take off all contaminated clothing. Rinse skin with
water/shower. Wash contaminated clothing before reuse. If inhaled, take person into
fresh air and keep comfortable for breathing. Immediately call a poison
center/doctor. If in eyes, rinse cautiously with water for several minutes.
Remove contact lenses if present and easy to do. Continue rinsing.
Storage: Store in a well-ventilated place. Keep container tightly
closed. Store locked up.
Disposal: Dispose of contents/container in accordance with
local/regional/national/international regulations.
This product is a “Hazardous Chemical” as defined by the OSHA Hazard
Communication Standard, 29 CFR 1910.1200.
Additional Safety Measures: Read the entire label and SDS before using
this product, and for additional first aid measures.