DESCRIPTION

ROCK HARD is the first step of a synergistic two-step polishing and maintenance program for all types of terrazzo and natural stone. ROCK HARD works to harden the surface of terrazzo, marble, and granite. Then, with the use of NCL-2 SURFACE CRYSTALLIZER, an easy-to-maintain, super high gloss is produced on the surface.

Terrazzo (both cementitious and resinous) will be improved with this process. It is recommended for polishing hard marble surfaces (such as serpentine} and most types of granite. It works to form a protective layer at and below the surface. Continued use of this product will increase the density of the surface. This will make the surface more resistant to wear and staining.

Authorized UL Product

KEY MARKET INFORMATION

Code: 2506

Packaging:

·         1 Gal

DIRECTIONS

SURFACE HARDENING:

The surface must be dry and free of any coatings, grease, or oil. Remove any floor coatings by using approved floor stripper; greases or soils should be removed with HURRICANE™ Intensive Stone Cleaner.

1.    Mist 4 trigger pulls of ROCK HARD™ – Step 1 onto a 9 sq ft (1 sq m) area.

2.    Buff with an AQUA MAGIC'” pad until dry. Repeat this process 1-2 more times until a slight gloss is achieved.

3.    Best results are obtained using the STONE BLAZER™ Floor Machine with a total weight between 140-180 lbs. It may be necessary to repeat this 3-4 times on very porous stone or cementitious terrazzo.

4.    Then mist 3 more trigger pulls of ROCK HARD™ Step 1 and buff with a Steel Wool pad until the surface is dry.

5.    Repeat process until surface has a moderate gloss at a 60° angle. The surface is now prepared for using NCL-2 SURFACE CRYSTALLIZER.

NOTE: If moisture is present, the Steel Wool pad may leave a dark transfer. Use an AQUA MAGIC™ or similar, light, natural hair pad to buff ROCK HARD until dry.

COVERAGE: For ROCK HARD: 25,000 – 30,000 sq ft (2,300 – 2,800 sq m) per gallon.

FEATURES & BENEFITS

·         Colorless

·         Odorless

·         Biodegradable

·         Increases surface density

·         Increases resistance to wear and staining

SPECIFICATIONS

Color: Colorless

Odor: Odorless

pH (Concentrate): 2.3 ± 0.2

Solubility: Disperses

Specific Gravity (g/cc): 1.08 ± 0.01

Density (lbs/gal): 8.8 ± 0.1

Freeze-Thaw Stable: Yes

Flash Point: None

Biodegradable: Yes

Shelf Life: 1 year minimum in original unopened container

SAFETY

DANGER: HARMFUL IF SWALLOWED. CAUSES SERIOUS EYE DAMAGE. CAUSES SKIN IRRITATION. MAY CAUSE RESPIRATORY IRRITATION. KEEP OUT OF REACH OF CHILDREN.

Prevention: Do not breathe mist or vapor. Wear protective gloves/protective clothing/eye protection/face protection. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area.

Response: If swallowed, rinse mouth. Do NOT induce vomiting. If on skin (or hair), immediately take off all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled, take person into fresh air and keep comfortable for breathing. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a poison center/doctor.

Storage: Store locked up.

Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 
This product is a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.

Additional Safety Measures: Read the entire label and SDS before using this product, and for additional first aid measures.