Directions

Floor Preparation:  Using BARE BONES®, No-rinse, No-scrub Liquifying Stripper, strip off old finish and wax following product label directions. For baseboards and corners, use a preferred NCL Baseboard Stripper.  Make sure the floor is clean and dry before applying finish.
Application: Using a clean mop or applicator apply a thin uniform coat of ONE.  Allow to dry for a minimum of 30 minutes after each coat.  Do not apply more than 4 coats in a 24 hour period.
High Speed Buffing and Burnishing: This is an ideal product for use with high speed polishing or burnishing machines of 1500- 3000 rpm (electric, battery or propane). Dust mop using a preferred NCL Dust Mop Treatment prior to high speed buffing or burnishing. Buff or dry burnish using an aggressive natural hair burnishing pad.  For spray buffing, mop-on restoration or auto scrubbing use SPIT-SHINE™ Ultra High Speed Kleen & Burnish.
Maintenance: Dust mopping daily using mop treated with a preferred NCL Dust Mop Treatment.  Use a recommended NCL neutral floor cleaner for routine cleaning.  Spray buffing to remove embedded soils is recommended using SPIT-SHINE Kleen & Burnish.  Worn  areas, or the entire floor, may be scrubbed and recoated as required to maintain a uniform high gloss.